the setting one drag two water temperature air conditioner type proceedings:

1.When one drag two water temperature air conditioner ,must know the up and two conditioner use the electric power supply must is the same phase. It must use the three pole battery socket.
2. Not use the two feet plug drag line board,and the the three eye socket. Use the one drag two conditioner.
3. When the pump line, must use the electric pen to test the up and down air conditioner pump to outlet, the fire line must to the fire line ,the null line to the null line. 。
4.If by the above require to operation ,the conditioner pass the electric wire, but when in the close station, the pump is running usually, must change the one of the power socket to the outline of the conditioner. And then by the three require to operation that to arrive the single operation
5. Because when the normal electric workman fitting the plug ,not by the international standards to line the wire, the left null line and the right line is fire to the ground principle,when the conditioner is in shut, it is shut the one wire, it could show the four item , for our fitting the one drag two air conditioner. Not line the red line to the red line of the outlet to the conditioner. The black line to the black line to the pump,if the short circuit,it could break the controller, it must use the electric pen.the fire line to the fire line,the null to the null line.

the set using attendance and servicing

1. And machine water outlet connect must use the copper tube connect tube use the combating ageing high pressure rubber connect tube,it could lest fitting break connecter.
2.Machine condensing pipe could not show press squash, knee bend and the water road not pass appearance。
3. Machine using temperature of the water not low than 7℃, the heat water not high than 80℃,the temperature above 5℃。
4. It must protection the verge of the wind and the tube of enter water compact and humectancy ,and prevent the pow to cost.
5. The enter water tube, it prompting is quasi, not make wrong, normal the left is enter tube, right is enter water tube, the enter method left ,right,back three practice choice.
6. The conditioner using voltage is 220V±10％, the frequency is 50Hz, the could fastness connect to the ground.
7. Three oculi outlet must the left is the null the right is fire to the ground, prevent the induction to electric.
8.The fitting pump must short than 10 centimeter, the pump body is low than the gassing enter water.。
9.The plant unit must near the water well, the pump waterinlet pipe must add the filtration equipment, to prevent the grit enter the pump to cause the pump break.。
10. The onhook fitting the board must use the level of transverse, the longitudinal vertical, not the condensed water to the group ,the board not endure the strength to 50kg .
11. The plant unit line is computer control not than the option change, it could keep the clean to the board.。
12.The filter to the air must to periodical to cleaning. It must clean very demilune one time by the using. To pressure the enter the wind and change cold effictiveness.

the special use declaration:

　If you not need the conditioner running, also need the water to using, and the conditioner plush power source. Press the control key ,the computer could control pump,the pump could work independency, or press the tank function key, the same could arrive the function, the temperature of the computer that the digit tube show the "PU"mode computer ,all the lamp flash .

the question in using:

1.In the make cold mode , if the conditioner not running, must reduce the positing temperature, the room temperature in the summer 33℃, the positing temperature must choice the 28℃,when the room temperature arrive 28℃,the machine could stop to working. Temperature undermost to the 15℃.
2.When in the make heat mode ,the conditioner not running, if add the positing temperature, the positing temperature could high than the room temperature to running.the temperature max is the 35℃.。
3.When in the make heat mode to close the machine ,the conditioner time delay running 2 minute could close the machine.。
4.If the conditioner have no power show, must to test the outlet if have power on, the socket connecter if is good, the computer control wire fuse whether is good . 。
5. If the conditioner not to make cold, must test the pump fuse if is good ,If water outlet in the running, water leakage
6.The product use the computer controller ,have the pump product equipment. When the pump have not working in long time and have produce the dead appearance, the conditioner could warning ,must to shut down the power, and trouble clearing
7. Must let the water that in the tube cleaning in the winter, to prevent the tube of the copper break, and let the pump freeze-proof work
8.The tank type cool-warmer conditioner have the PTC heat equipment, when the outlet gate not let any metal and any conductor object to enter, to break the heat machine to bring the electric shock danger and burn out equipment.
9. Before one decimeter the enter wind gate not place any equipment ,to keep the enter wind .
10. Not to dismantling by self in the using, not change the line ,could kindly to let the have qualification professional to test and maintenance or let the distribution and sales connect with our factory technique department.。
11.The concrete using please by the prompting function operation.